As an alternative to uploading a cccam.cfg file you can add a c line with your remote control.press the Menu button/select CCcam Client Setup/select Manage Config Files and the press the ok button.now select CCcam.cfg and press the ok button. Now you have to press blue button to add your c line information,this is what you should seeas you see you haveprotocolhostportuserpasswordlets imagine your c line is cccam.dyndns.org 12000 user1 pass1 this is how your c line info would lookprotocol = cccamhost = cccam.dyndns.org (or server box ip address)port = 12000user = user1password = pass1press the yellow button to save and activate the line as i explained in the above post. How to guide: Make a Openbox S9/S10 into a server1. Scroll down to Network Local Setting3. Press ok on remote4.arrow right to Newcamd Server Settings5. Press ok on remote6.
Enter newcamd server parameter7 servversetting -ON-8. TCP Port -eg. 13000- this MUST be forwarded in your router9. Des Key 011121314 Can be change to your own10.add user in Newcamd server User manager with green button on remote11. Add username password allow emm yes12. Press yellow to save the configuration.Now box is setup for server with 1 client and a reboot is always a good idea.In the Client box with CCcam its the N: line to use for acces the server eg N: seerveripordns Port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14(credit and thanks for the above to drf).
How to manually add a TP to your OpenBox (easy)This one is very simple to do, anyone can do it. I was missing channels because a frequency had been changed,so i got the new frequency and I simply added the TP, scanned it and found very quick.if your missing any channels and need to find frequencies for example on the sky satellite astra/eurobird 28 east click on this link2 ways you can start:1. Move the dish to the satellite you want to add a TP to.-or-2. Just go to the tp list and flip thru the satellites. OpenBox will automatically move the dish as you change satellites.-Either way here is the proceedure when you are on the sat you want to add to.1. MENU INSTALLATION TP List.2. Look and make sure you are on the correct satellite.
If not use the arrows to flip thru. If you were already on the satellite it should be the one selected alreadyu.3. Press green button to add.4. Type in the frequency, then arrow down to symbol rate5. Type in the symbol rate, arrow down to polarity. Use arrows to change polarity.6.
Arrow down to save, press OK button-To scan the TP:1. Press blue button on remote for Search2. Either press ok and it will search, or set the options if you want such as FTA only, TV/Radio and Network search. I just hit the ok button as the defaults are what I want with a manual TP scan.(credit and thanks to the author). HOW TO IDENTIFY IF YOUR OPENBOX/SKYBOX IS A CLONE OR AN ORIGINALIf you have Openbox/Skybox S9(S10) HD PVR with Ali3602 BGA. To identify if it is original or not as follows:If you have a firmware later than go to step 3, otherwise1. Backup up your current firmware (this saves a copy of your current firmware)press menu-tool-dump by usbSave your dump file2.
Upgrad to new firmware3.on your openbox/skybox remote press menu-tool-information( for openbox s11 press 8888 for openbox s10 press ok)-press 8888 (7777 for openbox S9)If chip ID is one of these numbers00D000EA085B0D0C98A198F29CF49D1A10150D7E38EC10AA1466113cCongratulatations! Your HD Receiver is original!! You can experience and enjoy much more more new functions.
Just spent a bit of time pooling info to figure this out and thought the information might be useful for some people.0. The Goal.I had my regular line that i'm mostly happy with, i then had an old line i had a few issues now and then with and what i wanted was to be able to use them both together.
So they both send requests to the server at the same time and if one goes down it will seamlessly switch to the other server.Two lines working together.0.5. Download OScam to your box.2.
Convert your line to OScam format (OScam.server).3. Generic configs to work with your server file4a. Transfer files to your box via USB.4b. Transfer files to your box via FTP.5. Fire it up!1.
On Wooshbuild press the Blue button on your remote, now choose Softcams and then Download Softcams. It will load a list of available ones. I went for oscamymod 18.64, select this and let it install. You now have OScam installed but it will need configuring soon!2. Now you need to convert your line into OScam format. Here is an example of mine with two lines, each one starts with the header reader.
Generic Configs for OScam are again simple text files that you can edit with notepad. But here are the ones i prepared for my own that you can download. These will work with your oscam.server file you made in step 2.4a.
This is how to manually transfer the files with a USB stick. Get a FAT32 formatted usb and put the two files from step three and the oscam.server file you made in step 2 onto it somewhere easy like the root directory.
Plug this stick into your box and ignore any errors that pop up.Press the green button on your remote and then scroll down the list and select Dreambox Explorer. Press ok on and then choose Usr, then Keys directory. Select your oscam directory mine was 'oscamatvymod'. Delete out of this directory oscam.server, oscam.conf and oscam.user.Now after deleting them select the top Parent Directory option until it takes you back to the list of storage devices. Choose your USB stick with the 3 files on, browse to each of the three files, and press the yellow button. Hen it will give you a list of devices again, choose 'Internal Flash' again, then Usr, Keys and your OScam directory. Press yellow to copy this file here.
Now go to section 5 to enable the Cam.4b. This is how you transfer files over FTP. Press the blue button on your remote and select Network, Network interface. In here you will see a line near the bottom saying IP Address, make a note of this as you will need it.
On your pc using an FTP program like Filezilla for example you need to enter the IP Address you just got into the Host section. The User is root and the Password will be root too. Port 21 then connect. When it connects you will be presented with a list of directories on the internal flash, you need to browse to Usr, Keys and then your Oscam directory. Mine was called 'oscamatvymod'.
From this folder delete the three files oscam.server, oscam.conf and oscam.user. Now in the left side local pc part of the file manager browse to whatever directory you saved the generic config files to and your oscam.server and drag and drop them into the directory you just deleted the files of the same name from. The files will now be on the box now go to section 5 to enable the cam.5. Press the blue button on your remote and select Softcam, Softcam panel.
Newcamd Free Servers
Now press right on cam 1 until you get to the OScam you installed in step 1. Mine was called oscamymod 18.64, when you see this press the green button on your remote and it will restart/enable the cam.If you followed this right then your cam will start up and you will see it switching between the two servers in the info box below the cam select.If anyone has trouble converting their line or needs any other steps clarifying just ask and i will update this as i see fit.
Newcamd Server Nfusion
This is the oscam.server I'm using.